Blow molding machines can be divided into three categories: extrusion blow molding machine, injection blow molding machine and special structure blow molding machine. Stretch blow molding machines can be assigned to each of the above categories. The extrusion blow molding machine is a combination of an extruder and a blow molding machine and a mold clamping mechanism, and is composed of an extruder and a parison die, an inflation device, a mold clamping mechanism, a parison thickness control system, and a transmission mechanism. The parison die is one of the important components that determine the quality of the blow molded product, typically a side feed die and a center feed die. The storage cylinder type blank die is often used for blow molding of large products. The storage tank has a minimum volume of 1kg and a maximum capacity of 240kg. The parison thickness control device is used to control the parison wall thickness, and the control point is up to 128 points, generally 20 to 30 points. The extrusion blow molding machine can produce hollow articles having a volume ranging from 2.5 ml to 104 l.

The injection blow molding machine is a combination of an injection molding machine and a blow molding mechanism, including a plasticizing mechanism, a hydraulic system, a control appliance, and other mechanical components. Common types are three-position injection blow molding machines and four-station injection blow molding machines. The three-station machine has prefabricated parisons, inflating and demoulding three stations, each station being separated by 120°. The four-station machine has one more pre-forming station, and each station is separated by 90°. In addition, there is a two-station injection blow molding machine with 180° between stations. The plastic containers produced by injection blow molding machines are accurate in size and do not require secondary processing, but the mold costs are high. The special structure blow molding machine is a blow molding machine that blows a hollow body having a special shape and use into a parison from a sheet, a molten material and a cold billet. The structure of the blow molding machine varies depending on the shape and requirements of the products produced.

advantage

1. The screw central shaft and cylinder are made of 38CrMoAlA chromium, molybdenum and aluminum alloy by nitrogen treatment, which has the advantages of high thickness, corrosion resistance and wear resistance.
2. The die is chrome-plated, and the screw mandrel structure makes the discharge smoother and smoother, and the blown film is better completed. The complex blown film structure makes the output gas more uniform. The lifting unit adopts a square frame platform structure, and the height of the lifting frame can be automatically adjusted according to different technical requirements.
3. The unloading equipment adopts the peeling rotating equipment and the center rotating equipment, and adopts a torque motor to adjust the smoothness of the film, which is convenient for operation.